Model: 80-1 and Model: 80-2 Low Speed Centrifuge for PRP Platelet Rich Plasma Tube Using

Instructions for use 

(1) The worktable of the 80-1 centrifuge should be flat and sturdy, and the workspace should be neat, clean, dry, and well ventilated. 

(2) Open the centrifuge cover and wipe the inner cavity and rotor clean. Place test tubes with consistent weighing. 

3) Close the centrifuge cover. 

(4)Turn on the power switch and the indicator light will turn on.

(5) Set the timing

(6) Adjustment speed knob to the desired speed. 

(7) Before each shutdown, the speed control knob must be set to the minimum position, the timer must be reset to zero, and then the power switch must be turned off. 

(8) Wipe the inner cavity and rotor, and close the centrifuge cover.